00 mustang viper 3203

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=134251
Printed Date: July 13, 2025 at 6:23 PM

Topic: 00 mustang viper 3203

Posted By: bill00
Subject: 00 mustang viper 3203
Date Posted: May 21, 2013 at 9:08 PM

Hi,

Need help to complete the installation. I have connected almost everything and I'm having problems with two connections.

Dome light supervision doesn't work. I have hook-up the BLACK/ white (pin 3/GEM 20PIN) to viper WIRE H1/9 and H2/7 to ground. It's not working? What I did wrong?

Also, starter kill. Does my car is Starter normally closed?

I'm not an expert, but I was able to connect door lock and other feature whit the help of this forum.

Any help will be greatly appreciated.

-------------
alain

Replies:

Posted By: bill00
Date Posted: May 22, 2013 at 5:59 AM

I have uploaded list of current connection. Highlighted in yellow are ones that is not working. Any help will be appreciated I’m completely stopped

posted_image

-------------
alain

Posted By: bill00
Date Posted: May 22, 2013 at 6:05 AM

-------------
alain

Posted By: tonanzith
Date Posted: May 22, 2013 at 9:46 AM

I haven't yet looked up the alarms manual and your cars connections to verify but looking at what you've posted if its accurate, you have the black whit out to the car for dome supervision needing to see a + signal from the white violet flex relay wire but you have that wire grounded. If the info is correct then the white violet flex relay wire needs to be hooked up to 12 v +

-------------
Gary Sather

Posted By: bill00
Date Posted: May 22, 2013 at 8:23 PM

Thanks Gary. It's working now. I was confused I guess posted_image

What about the starter kill. Is it Normally Closed (Motor Side)?

-------------
alain