Print Page | Close Window

avital 4300 avistart horn connection

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=134256
Printed Date: May 18, 2024 at 2:21 AM


Topic: avital 4300 avistart horn connection

Posted By: ddd64
Subject: avital 4300 avistart horn connection
Date Posted: May 22, 2013 at 1:28 PM

I have a 1996 chevy blazer with avital 4300 avistart. I am trying to connect the horn. Is this possible with this system? If so how would I do this.

Thanks
Donnie



Replies:

Posted By: kreg357
Date Posted: May 22, 2013 at 1:49 PM
The Avital 4300 Install Guide suggests that the Brown wire at H4/2 is the (-) 200mA Horn output. Should be able to directly connect to the Blazers horn wire.
Horn Trigger       Black (-)  @ steering column

-------------
Soldering is fun!



Posted By: ddd64
Date Posted: May 22, 2013 at 2:03 PM
Ok I am a little confused. So where would I plug the h4/1/2 connector to the module. According to the wiring diagram it shows the h4 being plugged in but on the module it self there is no place to plug it in.


Thanks
Donnie



Posted By: cmk0808ny
Date Posted: May 22, 2013 at 2:23 PM
The later 4300 models had the horn output. The earlier models did not. You may have an earlier version. Only siren output for the earlier version.



Posted By: ddd64
Date Posted: May 22, 2013 at 2:29 PM
Ok now I understand. It appears I have earlier version. Thank you very much


Thanks
Donnie


Print Page | Close Window