avital 5303 start die
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=134267
Printed Date: July 07, 2025 at 11:33 AM
Topic: avital 5303 start die
Posted By: fastblkcat
Subject: avital 5303 start die
Date Posted: May 23, 2013 at 11:10 PM
Hello first time posting here... I just installed a avital 5303 on my 2001 f250 super duty. Its all hooked up and working even the door locks.... that took a bit of thinking to figure out.. but now when remote started it starts runs like 2 seconds and shuts off... truck has no security system no pats key just steel key... when run the start kill diag on the avital says code 4 (remote shut off) the two way remote does beep and show shut down... not sure what could cause this... any thoughts on what I might be missing ?
Replies:
Posted By: smokeman1
Date Posted: May 24, 2013 at 6:37 AM
Did you do the TACH LEARN for the 5303? Page 32 of the install manual. What is the TACH wire conected to on the truck?
-------------
When all else fails, Read the Instructions
Support the12volt.com Make a Donation
Posted By: fastblkcat
Date Posted: May 24, 2013 at 8:36 AM
I have but may not have worked as I just learned its in bitmap mode so will switch it tonight and try that again...hopefully that works I'm hooked to a injector driver wire thank you for replying
|