how to remove viper 1002 on 2010 vw gti?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=134278
Printed Date: May 13, 2025 at 7:35 PM

Topic: how to remove viper 1002 on 2010 vw gti?

Posted By: atikovi
Subject: how to remove viper 1002 on 2010 vw gti?
Date Posted: May 26, 2013 at 8:34 PM

First off, why would anyone install it in the first place? Car already has an alarm system, immobilizer, remote keyless entry, etc. Anyway, anything I have to be careful of when removing the components? Is there an installation manual to download? The Viper website only has the owners manual.

Replies:

Posted By: howie ll
Date Posted: May 27, 2013 at 1:12 AM

First find and remove fuse.
Rejoin any vehicle wires that have been cut.

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.

Print Page | Close Window