power winndow to car alarm
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=134315
Printed Date: May 10, 2025 at 9:37 AM
Topic: power winndow to car alarm
Posted By: 2002ram1500
Subject: power winndow to car alarm
Date Posted: June 05, 2013 at 7:20 PM
ok, so I have a 2002 ram 1500 quad cab and I'm trying to hook my power windows to my alarm, its actually my door popper setup it's an autoloc kl800 I'm wanting to know what ohm I need to get the windows to work and the correct wiring.
-------------
2002 Ram 1500
Replies:
Posted By: tonanzith
Date Posted: June 07, 2013 at 12:02 AM
No ohm...
Left Front Window (Up/Down) lt. blue - white A driver window switch
Right Front Window (Up/Down) brn/wht - pur/wht A driver kick panel
Left Rear Window (Up/Down) RED / blk - blu/wht A driver kick panel
Right Rear Window (Up/Down) grn/wht - gry/blk A driver kick panel
-------------
Gary Sather
Posted By: howie ll
Date Posted: June 07, 2013 at 1:15 PM
Think you'll need a DEI 529t per pair to close your windows or a 530t per pair to close/vent/open.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: 2002ram1500
Date Posted: June 07, 2013 at 8:19 PM
ok thanks.
-------------
2002 Ram 1500
Posted By: 2002ram1500
Date Posted: June 08, 2013 at 8:37 PM
Ok why would I need a DEI 529t per pair to close your windows or a 530t per pair to close/vent/open wouldn't the alarm do the same.
-------------
2002 Ram 1500
Posted By: howie ll
Date Posted: June 08, 2013 at 11:14 PM
We are either at cross purposes here or you need to do lots and lots of research,
AFAIK No alarm currently on sale has built in window closers, secondly, what's the reference to a door popper?
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: 2002ram1500
Date Posted: June 09, 2013 at 5:11 PM
the door popper reference is to the solenoid for the shaved door handles.
I was thinking I could use a second channel to roll up the windows.
would that not work. Its a 8 channel alarm.
-------------
2002 Ram 1500
Posted By: howie ll
Date Posted: June 09, 2013 at 5:18 PM
Yes but that channel either has to activate window closers or you could use one relay for each direction but that's unsafe, over stressing the motors etc.
What ever made you think a low current aux output (>200 mAmp) would close a window motor drawing 12-15 amps?
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: 2002ram1500
Date Posted: June 12, 2013 at 7:11 PM
I just asking before I do something that could mess up my truck write now it just does the doors. just wanting to do something esle with the unused channels.
-------------
2002 Ram 1500
|