viper 5104 alarm

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=134325
Printed Date: May 13, 2025 at 11:38 AM

Topic: viper 5104 alarm

Posted By: scottalb
Subject: viper 5104 alarm
Date Posted: June 06, 2013 at 5:43 PM

I have a Viper 5104 alarm with the remote start installed 6 months ago. I did not do my home work on this and now would like to upgrade to a Viper 5901 with the temperature sensor built in to cool down my truck in the summer. My questions is do I need to pull out the old alarm and start over or can I use the 5104 wiring harness? The first one was professionally installed.

Thanks Scott

-------------
Scott

Replies:

Posted By: howie ll
Date Posted: June 06, 2013 at 9:12 PM

No but it would be a direct brain and control centre swap with a 5904.

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.

Posted By: scottalb
Date Posted: June 07, 2013 at 2:35 PM

So I can unplug the brain and plug in the new one?

Scott

-------------
Scott

Posted By: howie ll
Date Posted: June 07, 2013 at 4:27 PM

I already told you N0!
The 5X04 range are all compatible, the 5901 has different plugs and looms.

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.

Print Page | Close Window