516l does not speak viper armed
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=134344
Printed Date: May 05, 2024 at 12:24 AM
Topic: 516l does not speak viper armed
Posted By: booy
Subject: 516l does not speak viper armed
Date Posted: June 10, 2013 at 3:19 PM
Hello all,
I have successfully installed a Viper 5904 security system on my ride Honda Odyssey 2009. And I have add on a Viper - Programmable Voice System*516L to my ride. I have get it wired according to what the guide saids. when my car get remote starts, it will speak "Valet starting engine, stand clear". However when I armed or disarmed my ride, only the security system will "chirp" and lock/unlock, but the Siren will not say "Viper armed" and "Viper Disarmed". May I know how I can get it solved?
Am I set to an "silent mode" or valet mode"?
I have checked the 516L Ground-When-Armed wire was connected to the ground-when-armed input on the secutiry system.
Many thanks if anyone can offer help and advice, since I have been stucking for this case for days. Thanks!
Replies:
Posted By: booy
Date Posted: June 13, 2013 at 12:31 PM
I found there were no signal on he GWA input/output, may I know my system is not working?
|