Print Page | Close Window

mitsubishi box truck

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=134399
Printed Date: July 21, 2025 at 10:44 PM


Topic: mitsubishi box truck

Posted By: triniforever
Subject: mitsubishi box truck
Date Posted: June 18, 2013 at 5:47 PM

Installed a viper 5704 on this truck , pretty east install since I didn't have any wiring diagram for this truck.But my problem at this point is that I need a trigger for the back roll up door ,the interior light inside the box only works with the ignition on ,so I can't use that ..Any ideas will be gratefully appreciated .     Thanks

-------------
triniforever



Replies:

Posted By: howie ll
Date Posted: June 19, 2013 at 1:21 AM
Rolling shutter, magnetic reed switches, Metra etc, or a proximity detector.

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.




Posted By: triniforever
Date Posted: June 19, 2013 at 3:36 PM
Thanks Howie

-------------
triniforever





Print Page | Close Window