dei 529t
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=134408
Printed Date: July 20, 2025 at 11:02 AM
Topic: dei 529t
Posted By: tonio_925
Subject: dei 529t
Date Posted: June 20, 2013 at 5:10 PM
ok I recently installed a viper 3203 alarm in my 95 240sx S14 and I hooked up a 529t I followed the instructions and wired it according to instructions but when I press the lock button on remote nothing happens I already turned comfort closure on the brain and not a damn thing happens but maybe I missed something any good advice would be great this is the base model 95 240sx
Replies:
Posted By: tonio_925
Date Posted: June 20, 2013 at 5:15 PM
according to the wiring diagrams on here these are for the windows down | Windows Down | LF=Blue, RF=RED / Black |
but I tested RED / black and tested + when I rolled window up? this Is the last car I do an alarm on im not gonna be cheap anymore ima just pay a pro next time
Posted By: howie ll
Date Posted: June 21, 2013 at 4:11 AM
It has nothing to do with setting comfort closure, the 529t uses the orange armed output wire to the 529t orange and ORANGE / black.
Ignore the 529t grey and grey/black.
Find the motor wires that go from ground to 12v+ on raising the windows, cut and join as per instructions and ref the 529t, RTFM, also because someone tells you wire A is colour B, don't take it for granted that it's true, TEST and VERIFY.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: tonio_925
Date Posted: June 22, 2013 at 11:58 PM
howie ll wrote:
It has nothing to do with setting comfort closure, the 529t uses the orange armed output wire to the 529t orange and ORANGE / black.
Ignore the 529t grey and grey/black.
Find the motor wires that go from ground to 12v+ on raising the windows, cut and join as per instructions and ref the 529t, RTFM, also because someone tells you wire A is colour B, don't take it for granted that it's true, TEST and VERIFY.
that the problem my car originally never had the power window switches the whole harness was cut and I wired some momentary toggle switches to act as the window switches so theres like 2 separate 12v in the door
Posted By: howie ll
Date Posted: June 23, 2013 at 12:18 AM
Loook or rather listen.
At some point in your rat's nest will be two wires going to each motor. They are the wires the instructions talk about, = motor wires.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: tonio_925
Date Posted: June 23, 2013 at 2:20 AM
howie ll wrote:
Loook or rather listen.
At some point in your rat's nest will be two wires going to each motor. They are the wires the instructions talk about, = motor wires.
yeah green (driver side) and RED / white (passenger side) control up
Posted By: howie ll
Date Posted: June 23, 2013 at 3:33 AM
So what's your problem?
Just follow the 529t manual.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: howie ll
Date Posted: June 23, 2013 at 3:35 AM
I think I know the answer but you're the one on the ground with that wiring.
If you've cobbled up switch gear they won't work. The switch side of the 529t has to see a ground when operating.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: tonio_925
Date Posted: June 24, 2013 at 9:09 PM
howie ll wrote:
I think I know the answer but you're the one on the ground with that wiring.
If you've cobbled up switch gear they won't work. The switch side of the 529t has to see a ground when operating.
ill upload a pic of my wiring
Posted By: tonio_925
Date Posted: June 24, 2013 at 9:14 PM
howie ll wrote:
I think I know the answer but you're the one on the ground with that wiring.
If you've cobbled up switch gear they won't work. The switch side of the 529t has to see a ground when operating.
want me to splice a ground in there?
Posted By: howie ll
Date Posted: June 24, 2013 at 11:09 PM
Circuit diagram or what wire goes where.
Frankly if the windows work with your present setup, they'll work if you go to the motor wires.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: tonio_925
Date Posted: June 26, 2013 at 1:16 AM
howie ll wrote:
Circuit diagram or what wire goes where.
Frankly if the windows work with your present setup, they'll work if you go to the motor wires.
hmmm then I think my 529t is faulty
Posted By: tonio_925
Date Posted: July 01, 2013 at 1:31 PM
well I just got off the phone with Dei and they didn't wanna assist because I installed it myself 
|