05 acura tl

Hey all, did a Python 574 on this car (my car) same alarm as Viper 5704 ,this car has the extended double pulse for window roll up/down so I did window roll up with comfort closure 1 with the Lock button on the Python remote ,Works flawlessly ,now I also installed a Viper VSS 250 and this has two AUX channels, now I want to use one of these channels to roll the windows down ,and this is where my problem is .I can program the AUX 1 for a timed output for about 7 seconds which is perfect to roll down the windows but the negative AUX 1 output , needs to give the alarm disarm wire(white at driver's power window switch) a double negative pulse upon unlocking the car to roll down the windows and I can't figure out how to do this.I can also hit the AUX twice to do this but sometimes the SmartStart app does not respond well twice plus I really didn't want it to work that way. Helpppppppp   Lol.   Thanks for all your help

-------------
triniforever

I'm sure there are cheaper and easier ways to do it but..

Use a PAC TR-7 module triggered by the AUX1 output to supply a Double Pulse Output ( Feature #4 ).
The module costs about $17 and is pretty easy to program. Here is a link to the TR-7 install guide :
https://www.the12volt.com/installbay/file.asp?ID=1031

-------------
Soldering is fun!

Bloody Norah, you stuffed me again Kreg!
I was thinking 508d but how do I work a double pulse.
Anyway I had enough original thinking with my lock override on BMW roofs, I'll know about that homemade gizmo next Saturday.

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.

Thank you Kreg and Howie

-------------
triniforever