Print Page | Close Window

multiple receivers with one remote

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=134439
Printed Date: May 12, 2024 at 4:56 AM


Topic: multiple receivers with one remote

Posted By: timg
Subject: multiple receivers with one remote
Date Posted: June 26, 2013 at 2:50 PM

So this one is a bit of an oddball. Was looking on ebay for a cheap keyless entry setup for my truck. I see that they are darn cheap.. ~$15 for receiver and two remotes.

So I got to thinking that'd it be great to be able to open my garage door with the same cheapie remote, just get another receiver that I could wire into the garage door wiring. Then I'd like to take it a step further and install an electric door strike and another cheapie receiver on the garage man door.

I think I can figure out the wiring/activation of the receivers to whatever I want to control. What I'm wondering is, am I able to match up a single remote to all three receivers? Can I use the 'trunk' and 'panic' buttons on the cheapie remote to open the garage door and man door?

Told you it was an odd one..

Thanks!



Replies:

Posted By: the12volt
Date Posted: June 26, 2013 at 5:12 PM
Yes, you can use a single multi channel remote on multiple receivers. I'm still using an old Prestige remote to open/close the garage door and arm/disarm two vehicles. All that's really required is programming/pairing the remote to the receivers and of course having capable product.

-------------
posted_image the12volt • Support the12volt.com


Print Page | Close Window