clifford matrix +1

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=134536
Printed Date: August 29, 2025 at 2:40 AM

Topic: clifford matrix +1

Posted By: sphan1
Subject: clifford matrix +1
Date Posted: July 14, 2013 at 11:22 AM

Doing an install on my 2000 chevy c/k 3500 Service Truck. A little confused on where my connections Need to be. The Manual says connect Its yellow wire (86 on relay) to 12 Volt ignition when on and run. Should this be the pink or white? Green (30 on relay) to ignition switch. Black (87a) to starter. Found the wires, when ignition is on both wires got +12 volts.

My assumption is yellow to pink and green to white?

Replies:

Posted By: sphan1
Date Posted: July 14, 2013 at 1:10 PM

I got it all wired, now when Alarm is activated u Can still hear the Starter cranking. When Alarm is off start up is Not smooth. You Can hear the starter continue to turn over.

Posted By: sphan1
Date Posted: July 14, 2013 at 7:40 PM

I figured it out. Black and green Goes to yellow.

Print Page | Close Window