Print Page | Close Window

how to power acc and ignition

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=134569
Printed Date: July 14, 2025 at 7:02 PM


Topic: how to power acc and ignition

Posted By: dbarenas
Subject: how to power acc and ignition
Date Posted: July 19, 2013 at 8:50 AM

i have a 2011 Dodge Ram 1500 i hook up a pke with push button start and also i wired the remote start to DB-All i cant seem to get it to work like factory first press should be acc and second is ignition then third is start i push hold the button it start but when i press one i have no acc so is there someone could shed me some light pls help



Replies:

Posted By: i am an idiot
Date Posted: July 19, 2013 at 1:00 PM
What color wire on the truck did you tap into for acc? What color for Ignition?




Posted By: dbarenas
Date Posted: July 19, 2013 at 1:25 PM
well i wired the remote start to the DB-All according to Xpress kit one ignition went to thedb all and the start wire also went to the start signal of the db all and ground while running went to the ground so as soon as i hit the push button it start right away i like it work as oem one push acc goes on second ign goes on then third will be start with brake pedal




Posted By: dbarenas
Date Posted: July 19, 2013 at 1:27 PM
only the two wire on the mux and ignition pink with white is the ignition




Posted By: dbarenas
Date Posted: July 19, 2013 at 1:30 PM

the remote start has acc and two sets of ignition the acc i dont know where to tap it i want it to be first push my cluster goes on and the radio and what ever acc powers up





Posted By: dbarenas
Date Posted: July 20, 2013 at 5:42 AM
would someone please help




Posted By: dbarenas
Date Posted: July 20, 2013 at 10:27 AM
any help would be appreciated





Print Page | Close Window