Print Page | Close Window

viper 3105v on 95 accord

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=134583
Printed Date: May 03, 2024 at 7:57 AM


Topic: viper 3105v on 95 accord

Posted By: jrockscd5
Subject: viper 3105v on 95 accord
Date Posted: July 21, 2013 at 10:46 PM

Hey guys was wondering if anybody here new what wires go to the door lock/unlock from the viper 3105v to my 95 Honda Accord LX?
I tried wiring them but they wouldnt work.

posted_image
posted_image[IMG]uploads



Replies:

Posted By: kreg357
Date Posted: July 22, 2013 at 4:53 AM
H2/A___ Green (-) Lock, (+) Unlock Output   goes to BLACK/ WHITE (TYPE B) @ GRAY CONNECTOR ABOVE FUSEBOX in BLUE TAPE
H2/B___ Empty Unless Using 451M
H2/C___ Blue (-) Unlock, (+) Lock Output goes to ORANGE (TYPE B) @ GRAY CONNECTOR in FUSEBOX in BLUE TAPE
I would place a 1N4004 diode with the band towards the Viper in each of the output wires above.

H1/5 GREEN (-) Door Trigger Input, Zone 3 goes to BLACK/ WHITE (-) @ GRAY PLUG, RIGHT OF STEERING COLUMN
H1/6 BLUE (-) instant trigger input goes to Orange Trunk Trigger (-) @ GRAY PLUG, RIGHT OF STEERING COLUMN
If you plan on monitoring the hood with a Hood Pin, you can connect it to the H1/6 Blue wire also. Insert a 1N4004
diode with the band away from the Viper into each leg of this circuit.

-------------
Soldering is fun!



Posted By: jrockscd5
Date Posted: July 22, 2013 at 8:15 AM
Thank you I will try this.


Print Page | Close Window