2013 mb sl 550, stir+, and interface
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=134856
Printed Date: May 14, 2024 at 9:56 AM
Topic: 2013 mb sl 550, stir+, and interface
Posted By: cdifani
Subject: 2013 mb sl 550, stir+, and interface
Date Posted: September 11, 2013 at 5:17 AM
Guys:
Need some help here... as usual.
I've got a 2013 MB SL550 that I'm installing a Beltronics STiR+ detector system. In order to keep the install low key, I'm using the Mid City Engineering Cluster Interface (Part # 9500HS125/500) for the control and display of the STiR+.
That's relatively straight forward... except for the audio mute connections. I need to connect the STiR+ system into the car's audio control system, so it can mute the telephone, or the stereo, or whatever else is on.
That's the need... my problem is the "where" (there's a steering wheel "mute" control, but I suspect that's not the place to start... unless I really know what I'm doing...).
If anyone has any suggestions, pictures, or whatever, that will point me into the correct direction, I shall be eternally grateful...
Thanks,
Chris
Replies:
Posted By: quark kent
Date Posted: September 16, 2013 at 9:07 PM
Why not try the steering wheel mute wire? You might actually know what you are doing. I mean it makes sense that if a mute is needed and MB located it on the SW controls that it would work as a mute.
-------------
I can not explain to you what "nothing" is in a scientific way. What makes matters worse is you won't notice it when you finally have the opportunity to experience it.
|