need cm6000 circuit board picture 5
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=134872
Printed Date: May 11, 2024 at 8:19 PM
Topic: need cm6000 circuit board picture 5
Posted By: cousinit99
Subject: need cm6000 circuit board picture 5
Date Posted: September 14, 2013 at 3:24 PM
Hey, I'll send someone $5 via PayPal if they'd be so kind as to take a high-res photo of the CM6000's circuit board and email it to me.
A body shop was doing some interior panel work on my ride, and somehow they sliced into my Computstar's antenna cable, and now neither of my remotes work. I've already tried replacing the antenna and cable. I now suspect that they shorted the hot and ground lead in the cable and caused one of the SMD resistors on the brain's circuit board to blow out. The shop is refusing to take responsibility, so I need a high-res picture of a known-good, fully-functional CM6000 so that when I go in there and threaten legal action, I'll have a leg to stand on.
If someone PMs me, I'll give them my email address and send them $5 to their paypal email address once I have the photo. Much appreciated..
Replies:
Posted By: cousinit99
Date Posted: September 15, 2013 at 2:22 PM
151 views, but no takers? Wowsers. Ok, just so we're clear, the photo is obviously off-the-record. I'm not going to drag anybody into anything, here. If after looking at the picture I see that there really is a resistor missing, I'll go into a Pro Shop and have them assist me with "the rest", if needed.
Right now, I just need the photo. There's no Pro Shop with 150 miles of here.. Anyone?
Posted By: kreg357
Date Posted: September 15, 2013 at 3:15 PM
All I have in stock are the CM6200-s models. No CM6000's. Not sure if the antenna circuitry is the same...
-------------
Soldering is fun!
Posted By: cousinit99
Date Posted: September 16, 2013 at 12:46 AM
Thanks anyway, though..
Posted By: lucasoil4u
Date Posted: September 17, 2013 at 12:07 PM
I hae a cm6200 I can send you cheap its used but i know it works. Like 15+ shipping
Posted By: Velocity Motors
Date Posted: September 28, 2013 at 5:12 PM
Still need?
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: cousinit99
Date Posted: October 20, 2013 at 3:17 PM
Wth, there's 2 more posts now than there was the last time I looked. Why didn't I get email notifications. I was sure I was subscribed to this thread.. Sorry Jeff and lucas, I didn't see your posts.
Anyways, I took it to the closest (Compustar) dealer I could find, and sure enough, they blew something out on the PCB. The damage to the board doesn't seem to be readily apparent to the naked eye, but when the replacement brain works and the other one doesn't... you do the math.
The body took $150 off the work they were otherwise going to bill me for, so it worked out ok. Sorry for not responding earlier, but I thought this thread was totally dead..
Posted By: Velocity Motors
Date Posted: October 20, 2013 at 3:32 PM
Good to hear that everything worked out.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
|