light flash 02 silverado python414

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=134900
Printed Date: July 17, 2025 at 10:25 PM

Topic: light flash 02 silverado python414

Posted By: drrob
Subject: light flash 02 silverado python414
Date Posted: September 19, 2013 at 6:11 PM

Hello, I am working with a "Python 414 remote start" I'm having a problem with the light flash ckt not providing a ground signal to the H1/4 wht/brn wire. Does the polarity fuse have an effect? if so, how do I determine which position to put the fuse?
reply's appreciated in advance

Replies:

Posted By: drrob
Date Posted: September 19, 2013 at 6:12 PM

BTW working on a 2002 Chev Silverado LT, (loaded)

Posted By: kreg357
Date Posted: September 19, 2013 at 6:39 PM

The 2002 Silverado has both a (+) and a (-) Parking Light wire available at the BCM. I'm assuming that
you are using the Parking Lights (-) White (-) @ BCM, lt. blue plug, pin A5 wire. Ensure the Python's
Jumper/Fuse is in the (-) position and Connect the H1/5 White wire. The H1/4 WHITE/ Brown wire will not
be used.

-------------
Soldering is fun!

Posted By: triniforever
Date Posted: September 19, 2013 at 6:44 PM

If you look closely where the light flash fuse goes you will see a positive (+) and (-) icons place the fuse in which ever polarity you want .

-------------
triniforever

Posted By: triniforever
Date Posted: September 19, 2013 at 6:45 PM

Sorry Kreg I didn't see your post

-------------
triniforever

Posted By: kreg357
Date Posted: September 19, 2013 at 7:18 PM

It's all good. posted_image

Every bit of info helps.

-------------
Soldering is fun!

Posted By: drrob
Date Posted: September 20, 2013 at 1:37 PM

Thank you very much, got it all working.
will let it sit overnight and recheck in the morning.

Print Page | Close Window