Need help with Delta pro 5005

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=13494
Printed Date: July 19, 2025 at 4:26 PM

Topic: Need help with Delta pro 5005

Posted By: jb03
Subject: Need help with Delta pro 5005
Date Posted: May 13, 2003 at 8:41 PM

I recently purchased a delta pro 5005. I have everything installed but the door locks and the trunk release. Having a problem with the reverse polarity thing I think. My vehicle is a 1994 Gmc Yukon and I dl'd the diagrams from this site but still not working. I hooked the Red wire from the alarm to the orange wire in the doorlock harness. The light blue in the harness to the Green on the alarm and the BLACK/ White on t harness to the Blue on the alarm. It's not working???? I noticed on the provided diagram from this site that where it says door unlock its reverse polarity. Is there something I missed there?? With the trunk release I went from the back of the switch and tried both the orange and the brown wire with no luck. On the diagram it said wire was to be BLACK/ white but didn't see that there. With this alarm it says all relays are built in and they are - outputs. Your help would be greatly appreciated. Jody Barnes

Replies:

Posted By: jb03
Date Posted: May 13, 2003 at 8:47 PM

Sorry this is the link I looked at for the diagram:https://www.the12volt.com/installbay/detail.asp?info=alarm&year=1994&make=GMC&model=Yukon%204WD&ID=17946&type=Alarm Jody B

Posted By: draasch
Date Posted: May 13, 2003 at 8:55 PM

Power Lock LT BLUE DRIVER KICK PANEL BELOW #203
Power Unlock BLACK/ WHITE OR BLK/RED DRIVER SPEAKER

are you using relays????
what is the door lock outputs on the alarm??

Trunk Release BROWN (+) AT REAR GLASS RELEASE SWITCH #231

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt

Posted By: jb03
Date Posted: May 13, 2003 at 9:48 PM

No I didnt think I needed to use relays because it says they are built in. The outputs on the alarm are negative and had a ? What does the #203 and #231 mean?? Thanks for your help

Posted By: jb03
Date Posted: May 13, 2003 at 9:51 PM

OOOps it says Red---(+) 12v. out for the door locks