5904v

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=135034
Printed Date: May 07, 2025 at 1:50 AM

Topic: 5904v

Posted By: ninjafast
Subject: 5904v
Date Posted: October 08, 2013 at 6:16 PM

I have a 2011 Subaru WRX STi sedan. I have put a 5904v in it. I need to know 2 things #1 where does the (-)ignition 1 output go + the (-) starter output go ? And how to bypass the clutch? The alarm portion of the 5904v is working but not the remote start.
thank you in advance

-------------
ninjafast

Replies:

Posted By: ninjafast
Date Posted: October 08, 2013 at 9:10 PM

I am also using a 556u immobilizer interface , is there anything else I would need to make the remote start work in this car ?

-------------
ninjafast

Print Page | Close Window