05 gmc envoy w/ viper 5704

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=135090
Printed Date: May 14, 2024 at 7:48 AM

Topic: 05 gmc envoy w/ viper 5704

Posted By: anthonyl79
Subject: 05 gmc envoy w/ viper 5704
Date Posted: October 17, 2013 at 10:42 AM

I recently installed the Viper 5407V in my 05 Envoy with the iDatalink ADS-DL module and running D2D. Everything was working great till yesterday. When I arm it, I am getting a message back saying that door open. What would cause this guy to give me that feed back. I have open and closed all the doors several times and still getting the same message.

Replies:

Posted By: tbjoe
Date Posted: October 17, 2013 at 11:35 AM

Wait for the dome lights to go off before hitting the lock button to see if it still does it. You may have to set the alarm to ignore the active zone due to the delay in the dome light circuit.

Print Page | Close Window