passive starter kill connection.

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=13513
Printed Date: May 10, 2025 at 1:11 PM

Topic: passive starter kill connection.

Posted By: darwin
Subject: passive starter kill connection.
Date Posted: May 14, 2003 at 5:04 AM

i want to install Starter interrupts (passive starter kill) to my car.

And I don't know where to connect the "key side of starter" and "motor side of starter".

Replies:

Posted By: cpgoose
Date Posted: May 14, 2003 at 8:56 AM

When you look at the starter wire under the dash, it runs from the ignition switch (where you put the key) to the kick panel (near the underdash fuse box in my car at least). If you cut that starter wire in half, one half is considered the "key side" (the side running to the ignition switch), and the other side is considered the "motor side" (the side running to the kick panel).

Is that what you meant? Write back if not.

Print Page | Close Window