Print Page | Close Window

rs alarm on 04 jetta

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=135143
Printed Date: April 27, 2024 at 12:38 PM


Topic: rs alarm on 04 jetta

Posted By: ramon2001
Subject: rs alarm on 04 jetta
Date Posted: October 25, 2013 at 5:56 PM

can anyone please help. trying to install viper 5900 on 04 jetta with power windows. installed alarm and evrything works. when doing remote start part, car doesnt start.it cranks but no start.using expresskit dball, firmware oldvwaudi. can wires are located at comfort module inside car ORANGE / green and ORANGE / brown pins 6 and 9. cant locate ORANGE / brown wire in pin6.it is orange. went ahead and made connection. plugged in module and programmed. doesnt work. could it be the orange wire isnt correct. theres is no ORANGE / brown wire on comfort module in car.there are 2 wires coming out of ignition cylinder. green and black. are these the wires to be used? wich one is high and which one is low? been on this car for 8 hours and cant get it to star. please help. i dont want to give up. i want to finish it. i want to get it done. you all know that feeling when you finally get it right. please help. thanks......... :(

-------------
RAMON



Replies:

Posted By: shortcircuit161
Date Posted: October 25, 2013 at 7:26 PM
Did you put one of the ignition keys in a box or wrap it for the transponder bypass?

It looks like the DBALL only takes care of convenience features (door lock, truck pop, door status, etc) but not remote starting.

I could be wrong, but the guide says you need 1 key to operate the remote start function.

Even with iDatalink modules (which I prefer 1000 to 1 over Xpresskit), doesn't handle the remote start part.

If you can't find the right colors under the dash, try looking in the driver's kick panel for a twisted pair -
ORANGE / brown (Low) & ORANGE / lt green (High)

-------------




Posted By: smokeman1
Date Posted: October 25, 2013 at 7:42 PM
It would help if you listed all of the wires you connected to what/where/color on the car. Kinda gives us a diagram of the install.

Soldered or crimped connections?

Pin 6: Violet or ORANGE / Brown or Yellow/Brown     Can LO
Pin 9: Violet/White or ORANGE / Green or YELLOW /GREEN    Can High

-------------
When all else fails, Read the Instructions
Support the12volt.com Make a Donation





Print Page | Close Window