2007 nissam maxima
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=135281
Printed Date: May 05, 2024 at 9:46 AM
Topic: 2007 nissam maxima
Posted By: ricardoboston
Subject: 2007 nissam maxima
Date Posted: November 13, 2013 at 6:42 PM
hello everyone needs please some help on this car ,i will install a avital 5303 with ads al ca bypass the problem is do i have to get the immobilizer data and immobilizer clock wired?or just the can h and can l ,any tips i really appreciate thanks
Replies:
Posted By: blanx218
Date Posted: November 13, 2013 at 9:12 PM
You need to make all the connections as listed in the install guide for the ADS-AL-CA. No exceptions. It shows all need connected unless your vehicle does not have an immobilizer ring around the ignition. Which I have never seen an 07 Maxima without one.
Posted By: ricardoboston
Date Posted: November 14, 2013 at 5:32 AM
my question was just because i haven't used theses wires before ,can you tell me what this wires are used for ?cause the can h and can l is the ones the take care the immobilizer and any especial tip on this car or is a easy car to do remote start thanks
Posted By: blanx218
Date Posted: November 14, 2013 at 8:40 AM
The immobilizer data and clock wires take care of the transponder bypass. The CANH and CANL wires do everything else likes locks, trunk, door triggers, etc.. Its a pretty easy install as long as you follow the AL-CA diagram. Even if you don't understand it 100% they tell you to make the connections because you need them.
Posted By: ricardoboston
Date Posted: November 14, 2013 at 8:30 PM
i was thinking about a dlpk module ,looks pretty easy installation ,also i use it before the only thing its i will need to wire a relay for take over anyways even with ads al ca or what do you think?
Posted By: ricardoboston
Date Posted: November 16, 2013 at 6:54 PM
works perfect with dlpk i try for first ads al ca but it won't work everything else door locks,trunk, works just fine but not start ,i replace the module and it works DLPK FIX my day
|