2001 toyota camry

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=135300
Printed Date: October 31, 2025 at 12:28 AM

Topic: 2001 toyota camry

Posted By: ricardoboston
Subject: 2001 toyota camry
Date Posted: November 16, 2013 at 7:10 PM

i have a problem with this car i touch with my probe test light in the car chassi while i was probe the ignition 12volt white wire and it blow a fuse or something then power windows stopped to work but i test all the fuse and i could not find any fuse broken ,so next to the white 12v wigeon the ignition has another WHITE/ red 12volt this one still good so my question is anybody here know anything about that?how to fix it,....... i end up making a bridge between both and everything works again but i need fix it right,thanks advance

Replies:

Posted By: kreg357
Date Posted: November 16, 2013 at 8:30 PM

Did you find and check the 30 Amp Fuse AM2 with a DMM?

-------------
Soldering is fun!

Posted By: ricardoboston
Date Posted: November 17, 2013 at 7:32 AM

hi kreg yes i check all the fuses big to small and could not find nothing. i check both fuse box,i think this wire must have not a fuse but a brake point like it can be more easy to blow before the car get in fire ,i think best way to me figure it out is following the wires using ALLDATA, thanks