Print Page | Close Window

clifford concept 650mk2 plugs

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=135305
Printed Date: May 14, 2024 at 2:36 PM


Topic: clifford concept 650mk2 plugs

Posted By: elmo2002
Subject: clifford concept 650mk2 plugs
Date Posted: November 17, 2013 at 10:21 AM

Hi, can anyone help, I have been having problems with my concept 650. On investigation today I have found that all of the pins in the 2 white plugs on the loom side have pulled out. I have a install manual that tell you pin positions but am unsure how it is viewing the plugs.

Any help would be appreciated as 2 days of trying to sort this and I'm stumped!

Thanks



Replies:

Posted By: elmo2002
Date Posted: November 17, 2013 at 11:46 AM
Update

I now have all the wires back in and I believe they are in the correct place (confirmation would be good still)

However the new problem is neither the fobs or the valet code will disarm the alarm!
Any suggestion?????


Print Page | Close Window