07 santa fe unlock

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=135306
Printed Date: July 13, 2025 at 5:07 AM

Topic: 07 santa fe unlock

Posted By: ziggyb222
Subject: 07 santa fe unlock
Date Posted: November 17, 2013 at 10:53 AM

Seeing on some tech sheets about hooking the disarm wire along with the unlock wire? Is this correct?

Replies:

Posted By: triniforever
Date Posted: November 17, 2013 at 3:45 PM

Yes that's correct . The reason being that sometimes on Hundai's when the car is locked with the key , factory fob or the door lock switch it will not reopen with the aftermarket remote unless it "see's" a key in the door , A relay and three diodes needs to be integrated with the unlock and disarm wire for the aftermarket remote to work .

-------------
triniforever

Posted By: Chris Luongo
Date Posted: November 19, 2013 at 7:22 AM

You shouldn't need to connect the unlock wire at all.

Send a double pulse to the disarm wire, and a double pulse to the unlock detection (gray), at the same time. This will unlock all doors and disarm factory alarm.

Print Page | Close Window