2014 dodge avenger
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=135317
Printed Date: May 05, 2024 at 10:53 AM
Topic: 2014 dodge avenger
Posted By: triniforever
Subject: 2014 dodge avenger
Date Posted: November 18, 2013 at 5:46 PM
Just installed a 5103 into this car but just the alarm part of it , As no tech is available for this vehicle I followed the wiring for the 2013 and I found its exactly the same . The customer wants the remote start part of it hooked up and I was wondering if I flashed let's say an Idatalink CA module with the 2013 firmware if it will work . Has anyone done this ? Any feedback is appreciated .
------------- triniforever
Replies:
Posted By: Velocity Motors
Date Posted: November 19, 2013 at 7:21 PM
Will let you know on Thursday. I have one coming in from the dealership but from what I saw it should work fine with 2013 firmware.
------------- Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: blanx218
Date Posted: November 19, 2013 at 10:18 PM
If everything else is the same I cant see why there would be an issue.
Posted By: Velocity Motors
Date Posted: November 28, 2013 at 8:37 AM
Same as the 2013's. Flash it for 2013 and it will work the same.
*TIP* Remove the radio to access the SKIM module plug. This takes about 3 minutes and reduces your blood pressure by 10 fold. You will see what I mean if you try to remove and reinsert that stupid little plug from the steering column side.
------------- Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: triniforever
Date Posted: November 28, 2013 at 12:28 PM
Thank you Jeff and yes those blasted ignition switches and SKIM module plug does raise your blood pressure .
------------- triniforever
|