Print Page | Close Window

07 frontier shock sensor

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=135335
Printed Date: May 01, 2024 at 8:01 AM


Topic: 07 frontier shock sensor

Posted By: jasonp808
Subject: 07 frontier shock sensor
Date Posted: November 20, 2013 at 3:25 PM

Hey guys,
I'm trying to add a shock sensor to my factory alarm. I bought a DEI 504K and was wondering what wires I would hook up the trigger, power. Etc...

Thanks!



Replies:

Posted By: Velocity Motors
Date Posted: November 20, 2013 at 8:16 PM
This link will help with what your wanting to do.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA



Posted By: jasonp808
Date Posted: November 20, 2013 at 8:21 PM

Yea I saw this post. So according to the Frontier diagram on this website I hook the "trigger wire" to the door trigger (grey) and not the hood latch like in the post you gave me? Also do I need to add that fuse or can I just tap a constant 12V source?

Thanks for your help!




Posted By: Velocity Motors
Date Posted: November 20, 2013 at 8:35 PM
Always fuse cause this will protect your vehicle wiring. Use a 5 amp fuse for this application. Also, diode isolate the trigger wire so theres no potential of feedback to the door trigger.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA



Posted By: jasonp808
Date Posted: November 20, 2013 at 10:51 PM
Sorry for all the noob questions. How do I hook up a diode to the door trigger wire? It's a small piece of wire... What size diode is needed? Also since it's a constant 12v will the alarm ever turn off? When I run the mini add a fuse I just plug it into the fuse box with an empty spot that has a constant 12v? Is there another wire I should hook up the trigger to?


Print Page | Close Window