94 nissan hardbody cold/remote start
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=135341
Printed Date: May 15, 2024 at 3:02 AM
Topic: 94 nissan hardbody cold/remote start
Posted By: rwturbo
Subject: 94 nissan hardbody cold/remote start
Date Posted: November 21, 2013 at 5:43 AM
94 nissan hardbody pickup. Installed my auto page rs720LCD few months ago that came out of one of my other cars. Issue is it has been worling fine for 2 months. When the temperature changed and in the 30's the morning cold start up wont crank long enough on first try. Have tried tach signal and relearned twice, also now currently on voltage sense. Same issue first start in am cranks like 3 revolutions. second attempt is fine and rest of day is fine. Not the end of the world but Im anal and wanna know why. I have the second starter wire hooked up via a relay off the first starter wires control. Thanks
Replies:
Posted By: KPierson
Date Posted: November 21, 2013 at 7:21 AM
Is there an OEM security transponder on the vehicle?
-------------
Kevin Pierson
Posted By: rwturbo
Date Posted: November 21, 2013 at 7:30 AM
no factory security at all. Like said works fine except lower temps. I will check my second starter relay this evening to make sure its still functioning.
Posted By: offroadzj
Date Posted: November 21, 2013 at 4:50 PM
Does that unit have a negative 2nd starter? Are you learning tach with the engine warm or cold? If warm, you can use the gas pedal to bring the RPM up slightly (roughly 1200 rpm) then learn the tach. If cold, then wait for the RPMs to drop to around 1200 before learning. You can also try using a low diesel wait time... in case something isn't 'waking' up quickly enough.
-------------
Kenny
Owner / Technician
KKD Garage LLC
Albany, NY 12205
Posted By: rwturbo
Date Posted: November 22, 2013 at 4:54 AM
has 12 volt second starter I relearned tach sense and wasnt to cold this morning but will be this weekend. I will report back thanks. Also reved it up some on relearn.
Posted By: rwturbo
Date Posted: November 25, 2013 at 5:39 AM
reset tach learn to higher rpm fixed my issue ,thanks.
|