2011 honda insight hybrid
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=135375
Printed Date: April 27, 2024 at 1:22 AM
Topic: 2011 honda insight hybrid
Posted By: ricardoboston
Subject: 2011 honda insight hybrid
Date Posted: November 25, 2013 at 9:35 PM
how are you techs i need please know if this car its a easy car to do remote start cause i never did one before hybrid so anything that i should know before start on this one ,do i need to do the locks or just one bottom remote start will be good? i planned to use an avital 4103 with ads al ca thanks
Replies:
Posted By: ricardoboston
Date Posted: November 26, 2013 at 8:13 PM
hello guys help me out with this please on the ads al ca idatalink they are saying on the cart reference number 1 something about the start wire to be connected to the module ads al ca but do i still to have it connected to the start wire on the car? also what they mean when they asking for GROUND WHEN RUNNING FROM R/S MUST BE PROVIDED BEFORE IGNITION . how i do that? i know the blue/white status wire goes to the bypass module ,what else do i need to do ,thanks everyone
Posted By: kreg357
Date Posted: November 26, 2013 at 8:54 PM
Yes, standard 4103 to Insight ignition wire connections. Plus 4103 Starter to ADS AL CA ( if going W2W ).
The 4103 should have the correct timing on the (-) Status Output (GRW) such that it precedes the Ignition wire going to +12V. ------------- Soldering is fun!
Posted By: ricardoboston
Date Posted: November 27, 2013 at 3:36 PM
ok i got it,another question is this car has anything different from the others non hybrid, when we do the remote start i mean the tach ,can i have it programmed to voltage and crank to 0.8sec? and should i do lock and unlock or just R/S thanks kreg357
Posted By: triniforever
Date Posted: November 27, 2013 at 5:45 PM
Engine checking is not needed and should be turned off .
-------------
triniforever
Posted By: buddholly
Date Posted: November 27, 2013 at 5:45 PM
engine checking should be turned to off and turn crank time up as high as possible.
-------------
Posted By: lucasoil4u
Date Posted: November 29, 2013 at 11:12 AM
Very simple car to do ! How did it go for you ? Are you having any issues?
Posted By: ricardoboston
Date Posted: December 05, 2013 at 5:27 PM
hi lucasoll4u have you done this car before?can you teach me some info about this car .is this car simple as any regular hondas ,toyotas, how about the hybrid ,anything different ?like how should i program the start ?tachless? any tips thanks
Posted By: ricardoboston
Date Posted: January 03, 2014 at 9:41 PM
sorry i was working in another job tataly forgot about my last post ,everything was very easy ,car done ,perfect thanks
|