viper 4105 in hyundai santa fe

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=135433
Printed Date: May 12, 2025 at 2:16 PM

Topic: viper 4105 in hyundai santa fe

Posted By: revrider76
Subject: viper 4105 in hyundai santa fe
Date Posted: December 02, 2013 at 9:53 AM

Installing a viper 4105 in my 2008 santa fe and am having a problem with arming and disarming the factory alarm. I printed off a wiring diagram from here and it says the alarm wire is BROWN / orange in dkp which I found. The disarm wire is a grey wire and pink wire (double pulse). So my question is how do I hook up the single wire from remote start unit to the 2 wires in the car? Ive been out of the car electronics area for a looooong time so I'm a little rusty.
Thanks for the help!

Replies:

Posted By: dasbogie
Date Posted: December 02, 2013 at 11:13 AM

One way would be to split your disarm output with 2 diodes bands facing the viper.

-------------
Advanced

Print Page | Close Window