Print Page | Close Window

compustar and 2013 toyota 4runner

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=135521
Printed Date: May 05, 2024 at 9:55 PM


Topic: compustar and 2013 toyota 4runner

Posted By: gw99
Subject: compustar and 2013 toyota 4runner
Date Posted: December 11, 2013 at 6:45 PM

Hello,

Could anyone perhaps provide me instructions on how to program a 2 way compustar remote on a push button start. 2013 Toyota Avalon? It says to turn the key 5 times, but there is no key.

Thanks in advance!



Replies:

Posted By: cmk0808ny
Date Posted: December 11, 2013 at 7:01 PM
Jump 12v to the ignition wire 5x.



Posted By: offroadzj
Date Posted: December 11, 2013 at 8:53 PM
What cmk said. Trying to cycle the ignition 5x is a royal PITA to do within the alloted time period. It is a lot easier to just jump power to the ignition wire 5x.

-------------
Kenny
Owner / Technician
KKD Garage LLC
Albany, NY 12205



Posted By: kreg357
Date Posted: December 11, 2013 at 9:35 PM
Doing this during "Bench Prep", before the system is even near the vehicle, is another good idea....   posted_image

-------------
Soldering is fun!



Posted By: Ravendarat
Date Posted: December 15, 2013 at 11:39 PM
Ya its POSSIBLE to do but its a bitch hitting that start button like 15 times in 5 seconds and having the car register every press lol

-------------
double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer


Print Page | Close Window