2002 cavalier domelight supervision.
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=135545
Printed Date: May 18, 2024 at 8:16 PM
Topic: 2002 cavalier domelight supervision.
Posted By: apalacios313
Subject: 2002 cavalier domelight supervision.
Date Posted: December 15, 2013 at 10:36 PM
I am installing an Excalibur al-1850 security and remote start alarm to a 2002 cavalier, I have installed everything except for the Dome light supervision. In the wiring diagrams it tells me to use the door trigger. I have two door trigger wires one GREEN/ black that catches the drivers door and LT. Blue that catches passengers doors. I connected the 2 door trigger wires to the alarm system using 1 amp diode for each wire (GREEN/ black and Lt. Blue) so my question is should I tap my alarms dome light supervision wire to those 2 door trigger wires?? and before or after the diodes.
------------- Aurelio Zamora
Replies:
Posted By: powerslave
Date Posted: December 16, 2013 at 12:59 AM
Dome light supervision is a feature that usually requires a relay. It will turn on your dome light(s) when you unlock/disarm the alarm. It is not for a trigger.
|