Print Page | Close Window

idatalink

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=135603
Printed Date: May 02, 2024 at 10:03 AM


Topic: idatalink

Posted By: itsmars
Subject: idatalink
Date Posted: December 23, 2013 at 6:21 PM

I have ordered idatalink bypass module to go along with the viper 5704 for my 2011 camaro and before i dive in i had a couple of questions Im no pro (clearly) so any help is much appreciated Xmas broke me..lol
What does the squiggly line going to the clutch pin 2 with the 180 over it (diagram top left angle) and i think i know but 2nd do i cut the immobilizer data wire to the car then connect wire to cut wire then other to pin 2 (diagram top right)again thanks
posted_image



Replies:

Posted By: buddholly
Date Posted: December 23, 2013 at 6:49 PM
Thats the symbol for resistor so 180 ohm resistor on the (-) starter output to do clutch bypass.

White red splice into GREEN/ red will face the vehicle and WHITE/ black will go to the other side.

Not a real easy vehicle I've done a couple but there's not a lot of room to work and trying to solder in the vehicle can be a PITA. Make sure you double check your wires are away from any moving parts in and around the steering column.

-------------



Posted By: itsmars
Date Posted: December 23, 2013 at 10:43 PM
ok thank you



Posted By: itsmars
Date Posted: January 03, 2014 at 10:59 AM
Was wondering if you need to use wires from brain of alarm if you use the blade cartridge



Posted By: offroadzj
Date Posted: January 03, 2014 at 11:57 AM
The blade module only works on the Compustar remote starters. It will not work with any Viper systems.

-------------
Kenny
Owner / Technician
KKD Garage LLC
Albany, NY 12205



Posted By: itsmars
Date Posted: January 03, 2014 at 1:36 PM
No sorry forgot to include that i didn't keep the viper i went with compustar because of the positive reviews (cm6000)


Print Page | Close Window