bench test/setup demo

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=135651
Printed Date: May 18, 2024 at 6:14 AM

Topic: bench test/setup demo

Posted By: smokeman1
Subject: bench test/setup demo
Date Posted: December 29, 2013 at 5:05 PM

Link to a Bench Setup Demo video (4:47) of a Python 872/Viper 5701. Might help someone, doing their first remote start install, understand what the wires are for and where they might go on the vehicle.

No bypass module was used in the video. That might be the next video.

https://youtu.be/uq1ETQxMp7M

-------------
When all else fails, Read the Instructions
Support the12volt.com Make a Donation

Replies:

Posted By: kreg357
Date Posted: December 29, 2013 at 7:21 PM

Very good video. Two thumbs up. Covers all the basics. posted_image

That setup took quite awhile to do. A novice might get a quick dose of reality looking at all those wires that need to be connected!

-------------
Soldering is fun!

Posted By: gr8twhite
Date Posted: January 04, 2014 at 11:11 AM

Very cool.

Nicely done too.

Simple, clean, clear, good camera control and to the point.

Not like some of these "youtubers" that feel the need for silly or loud background music and are flipping the camera all over the place.

Print Page | Close Window