2001 escape anti theft reset procedure.
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=135682
Printed Date: May 07, 2024 at 12:53 AM
Topic: 2001 escape anti theft reset procedure.
Posted By: azamora619
Subject: 2001 escape anti theft reset procedure.
Date Posted: January 01, 2014 at 2:38 PM
I have a 2001 ford escape, that I want to install an Excalibur AL-1850 remote start. I have gotten the BLADE - TB bypass module. But before I start, I just want to know if in case that I programmed incorrectly the bypass module and the anti-theft system activates. Can it be reset???? and if it can, how is it done? thanks....
-------------
Knowledge is Power.
Replies:
Posted By: Twelvoltz
Date Posted: January 02, 2014 at 10:58 AM
If the Escape does not see the correct transponder it will not start just for that particular start cycle. There is no reset required, simply starting it with the correct key/transponder will allow it to start right after the failed attempt.
-------------
Installer, IT support, and FFL. I need less hobbies.
Posted By: azamora619
Date Posted: January 02, 2014 at 3:33 PM
Thanks, just wanted to make sure, because I had installed a remote starter on my moms 2002 cavalier and I accidentally remote started the car with out first programming the bypass module, and boy was it a pain on the behind to reset it. I had to wait a whole day for the GM passlock to reset.... Im glad Ford PATS is a lot more friendly than the GM passlock. Now I feel ready to do this installation.. Again thanks...
-------------
Knowledge is Power.
|