Print Page | Close Window

dball2 flashing key2go for remote start r

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=135718
Printed Date: May 03, 2024 at 11:23 AM


Topic: dball2 flashing key2go for remote start r

Posted By: aykfc
Subject: dball2 flashing key2go for remote start r
Date Posted: January 04, 2014 at 7:52 PM

So I got a t-harness dball2 and xkloader2 so I can flash the dball2. My Nissan juke is remote start ready so I just need to get the dball flashed and installed. The problem I am having is that xpresskit.com the site you use to flash the dball2 won't let you flash key2go as you have to be a dealer. You can flash it normally right on the site but from my knowledge the only way I can use the rsr (remote start ready) is to use the key2go feature which is compatible with rsr cars. Most cars you can flash normally but it won't work. Anyone have any suggestions on if I can find someway to flash it myself or if I can get someone else to flash it for me? I'd rather not pay 100 dollars for it to be installed when I've already installed the harness and dball. I just need it flashed now. Is there anyway I can get temporary access on an account. I would pay a bit for that access I am close to finishing this project.



Replies:

Posted By: aykfc
Date Posted: January 04, 2014 at 7:54 PM
I forgot to mention this is a Nissan push to start 2013 juke sv. Not sure if that matters but figured it should be included.




Posted By: lucasoil4u
Date Posted: January 07, 2014 at 11:48 AM
you need to flash it threw the DEI flasher. you dont have to be a dealer but you do need the flasher cord. I cant remember if you need to be a dealer.




Posted By: bl4ck3d0ut
Date Posted: January 07, 2014 at 11:54 AM
You can flash Xpresskit modules if you have the cable but you need a directechs login to do Key2Go. Your best option is to use a Idatalink/Flashlogic bypass as KLON (Key2GO) is available to everyone




Posted By: lucasoil4u
Date Posted: January 07, 2014 at 1:12 PM
Wonder why some of the best shops in the area are shutting down. Good luck with your stuff.





Print Page | Close Window