which can interface is reccommended?
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=135725
Printed Date: April 28, 2024 at 5:35 AM
Topic: which can interface is reccommended?
Posted By: jncomutt
Subject: which can interface is reccommended?
Date Posted: January 05, 2014 at 8:46 AM
I'm installing a Compustar FT-6000AS-CONT into a 2007 Volvo S60. I see there are CAN interfaces made by Fortin, iDataLink, and also Xpresskit DLPK. Is there a certain combination that is known to work best? They all look pretty similar, but before I order, I wanted to see what the consensus on this forum was.
Summary:
2007 Volvo S60R Auto Trans
System to be installed:
Compustar FT-6000AS-CONT
RF-P2W901-SS Remote Kit
FT-RPS Touch Module
FT-EzGo RFID Handsfree Kit
Replies:
Posted By: cmk0808ny
Date Posted: January 05, 2014 at 10:04 AM
use the Blade-AL module. Its idatalink and it will klon the key. No key is relinquished. It will plug directly into the slot on the compustar brain and give you a wire harness to plug into the compustar brain for the bypass.
Posted By: jncomutt
Date Posted: January 06, 2014 at 7:22 AM
Thanks for the suggestion. I didn't realize that the iDatalink would Klon the key. I've been doing some reading on various websites, and everything has lead me to believe there was no way to do the install without a hidden key. Most of the posts are from years ago, but its good to know there is a simple solution.
Posted By: cmk0808ny
Date Posted: January 06, 2014 at 7:39 AM
I'm sorry it does need a key. i was thinking it was a push start not a key start one. either way you still need a blade al for the factory alarm and convince features. just need to wrap the key with the blade wires.
|