soldering
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=135791
Printed Date: April 29, 2024 at 1:55 AM
Topic: soldering
Posted By: ziggyb222
Subject: soldering
Date Posted: January 11, 2014 at 10:04 PM
What is everyone using to Solder their connections with. I use a D650 Weller gun...would like to try something smaller!!!! Ideas????
Replies:
Posted By: enice
Date Posted: January 11, 2014 at 10:53 PM
Hakko FX601-02 Adjustable Temperature Controlled Soldering Iron, 67 Watts..
Honestly the best soldering iron I ever used. PERIOD!!!!
I solder small wires on circuit boards and large ignition wires with no problem at all.
-------------
Eric
Audiomaxx
528 East Fordham Road
Bronx NY 10458
Compustar Top Gun Dealer Award 2012-2013
Posted By: ziggyb222
Date Posted: January 11, 2014 at 10:59 PM
The big ignition wires, does it take long to get heated up?
Posted By: enice
Date Posted: January 12, 2014 at 8:37 AM
It melts them within seconds.. including the power wire on hondas. I just wrap my wire on the ignition wire and touch it with my iron and touch the wire with the solder and it flows perfectly. It is really hot and heats up within seconds after you tun it on.
-------------
Eric
Audiomaxx
528 East Fordham Road
Bronx NY 10458
Compustar Top Gun Dealer Award 2012-2013
Posted By: ziggyb222
Date Posted: January 12, 2014 at 3:05 PM
Gonna give it a try...Thanks
|