key sensor
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=135807
Printed Date: May 16, 2024 at 2:03 AM
Topic: key sensor
Posted By: maxamy
Subject: key sensor
Date Posted: January 12, 2014 at 8:18 PM
I have a quick question... Is key sensor wire the same as ignition 2... reading all over the web and can't figure out what ignition 2 wire is on my vehicle... 2007 F150 ...
Replies:
Posted By: maxamy
Date Posted: January 12, 2014 at 8:20 PM
Its the black and pink one in question...
Posted By: Ween
Date Posted: January 12, 2014 at 8:26 PM
2004 and newer F150 don't have an ignition 2 ...so you won't find one.
The key sense lets the vehicle know a key is inserted into the key cylinder (ignition switch).
Mark
Posted By: maxamy
Date Posted: January 12, 2014 at 8:30 PM
so does that mean you just don't connect it? I have everything else connected and it didn't do anything when I hit the remote... not sure what else to do..I figured it was doing nothing since ign 2 wasn't connected...
Posted By: Ween
Date Posted: January 12, 2014 at 8:32 PM
Correct, it can be left open/disconnected.
Posted By: Ween
Date Posted: January 12, 2014 at 8:55 PM
There is no response when the remotes are used?
Posted By: maxamy
Date Posted: January 13, 2014 at 5:02 AM
When I program the remote I get a click from the remote starter unit... No response from the truck... I feel pretty sure it's connected right... I really took my time sand paid attention to detail... I'm wondering about that key sensor wire on the ignition harness...does it need to be connected?
I've connected...
12V to Battery
I ran another 14Ga to the Battery
Acc
Starter
Ignition to Ignition1 on remote starter
Hood pin
Brake Pedal
Ground
USing a Audiovox AS-9055
2007 Ford F150...
Posted By: maxamy
Date Posted: January 13, 2014 at 5:07 AM
Posted By: maxamy
Date Posted: January 13, 2014 at 5:09 AM
I've not messed with PATS yet, just trying to get the remote starter to work with the key in then I'll start working on that... All I'mm looking for is a response from the starter when I click the remote ... as of now I'm not getting that...
Posted By: chev104275
Date Posted: January 13, 2014 at 6:30 AM
What make/model of remote start ?
-------------
If i Can't Install it I Don't need it Joe
Posted By: maxamy
Date Posted: January 13, 2014 at 3:59 PM
Audiovox AS 9055T ... Sorry
|
