avital 4113 remote start issues
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=135826
Printed Date: May 02, 2024 at 2:43 AM
Topic: avital 4113 remote start issues
Posted By: ceoltoir
Subject: avital 4113 remote start issues
Date Posted: January 13, 2014 at 9:37 PM
I just installed a avital 4113 in a 2011 crown vic. I have hooked up just the basics. When I hit the remote button once.. The dash lights turn on the the starter try's to turn and shuts off. I tried increasing the starter time but it still dies. This is a police model vic so there is not chip key..... , any ideas?
Replies:
Posted By: ziggyb222
Date Posted: January 15, 2014 at 11:59 AM
Make sure you do not have a ignition wire and accessory wires mixed up...and make sure all the ignition wires are powered
Posted By: ayalja123
Date Posted: January 23, 2014 at 2:11 PM
It sounds like you do have a transponder key to me. Try it with the key in the ign. if the car stays running more than likely that's your problem.
Posted By: lucasoil4u
Date Posted: January 24, 2014 at 8:50 AM
He is correct that most Police models dont have chips in the key. But You should still try it with the key in the ignition and see what happens. Double check everything with a DMM. Thats the only way to know. Did you learn tach ? Or are you using virtual tach?
|