Bulldog RS602E help.
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=13586
Printed Date: July 18, 2025 at 9:46 PM
Topic: Bulldog RS602E help.
Posted By: SoulREX
Subject: Bulldog RS602E help.
Date Posted: May 15, 2003 at 11:53 PM
Hey guys, I'm installing a Bulldog RS602E in a friends car, and I don't know what to do with the shock trigger inputs.. He bought the dual stage shock sensor, and a dual stage dopplar sensor, but the RS602E only has a one wire trigger, not dual. I wanted to know if there was a simple circuit I could build from relays to make use of the dual stage by kicking the siren trigger line a few short times to simulate a pre-warn tone. Any help would be appreciated. TIA -Sean
Replies:
Posted By: SoulREX
Date Posted: May 29, 2003 at 10:56 AM
No one has any help they could offer? I just need ideas on a simple relay ciruit to intermittantly hit the siren to simulate a pre-warn... thanks..
Posted By: bdl666
Date Posted: May 29, 2003 at 1:56 PM
Does the sensor have an adjustable trigger time or is it just a pulse output. If it has the adjustment all you need is a relay and a flasher(signal lights flasher).
|