excalibur rs 250, 2003 silverado
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=135866
Printed Date: June 09, 2024 at 5:48 AM
Topic: excalibur rs 250, 2003 silverado
Posted By: Rjahr01
Subject: excalibur rs 250, 2003 silverado
Date Posted: January 19, 2014 at 10:59 AM
Long time member new poster here!! Truck is a 2003 chevy silverado with keyless entry from the factory- I am trying to add remote start. 1st question is do I need the bypass module, when I put a key in the cluster says key 1 but, I had a broken ignition a year ago and my mechanic put a new ignition in with a new chevy key and just the other day I made a new blank for it at a car quest ($2.00) and it starts the car perfectly fine but the cluster says key 1 when either key is in the ignition- thanks for all your help
Replies:
Posted By: kreg357
Date Posted: January 19, 2014 at 4:22 PM
Probably do need a bypass module ( unless the mechanic did something to the BCM programming ). Passlock2 does not have a transponder chip in the key. The ignition cylinder has internal resistor, therefore a regular key will work but the remote starter won't because it doesn't rotate the ignition cylinder to ON.
-------------
Soldering is fun!
|