compustar 6200 module

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=135869
Printed Date: May 14, 2025 at 5:26 AM

Topic: compustar 6200 module

Posted By: TooDark
Subject: compustar 6200 module
Date Posted: January 19, 2014 at 4:38 PM

I was trying to a trill pulse for remote start on the 6200 module. I changed setting from default and pulsed the pink wire and nothing. Is there something else I have to do?

Replies:

Posted By: kreg357
Date Posted: January 19, 2014 at 8:13 PM

Option 4-10 must be at the Default setting of Trigger Start. Option 2-04 will set the number of (-) 60mSec pulses required
to initiate a R/S ( on CN3-14 Pink wire ). Typical is three pulses ( 2-04 Opt IV ).

-------------
Soldering is fun!

Print Page | Close Window