Print Page | Close Window

gentex gntx 511 pinout

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=135892
Printed Date: May 03, 2025 at 3:39 AM

Topic: gentex gntx 511 pinout

Posted By: bicarbonite
Subject: gentex gntx 511 pinout
Date Posted: January 22, 2014 at 5:56 PM

I've got a 511 without Onstar and I'm wondering if anyone here might have the correct color/pinout for it?

The connector currently looks like this:

1 blank
2 blank
3 dk blue
4 dk green
5 grey
6 dk GREEN / WHITE stripe
7 BROWN / white stripe
8 black
9 light green
10 blank
11 blank
12 blank
13 yellow
14 blank
15 blank
16 pink

some of the diagrams I've found so far have different colors for pins 6, 7 and 16. I assume mine would be fine to use for the ambient temp sensor but I want to make sure before i apply voltage.

Replies:

Posted By: bicarbonite
Date Posted: January 22, 2014 at 7:46 PM

I hope this was in the right topic area.. hard to gauge.

Posted By: bicarbonite
Date Posted: January 23, 2014 at 4:36 PM

Ok well nevermind people. Ill have to look elsewhere.

Print Page | Close Window