autostart accessory wire

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=135905
Printed Date: May 15, 2025 at 1:54 AM

Topic: autostart accessory wire

Posted By: 97sunflower
Subject: autostart accessory wire
Date Posted: January 23, 2014 at 6:12 PM

I have to install an Autostart remote start in a 2011 Dodge Ram 1500. This vehicle does not have an accessory wire. I know the Autostart ignition wire is an input as well as an output. Is the accessory wire an input as well as an output or just output only?

Replies:

Posted By: triniforever
Date Posted: January 23, 2014 at 7:31 PM

What bypass are you planning on using? Usually the bypass takes care of everything on those vehicles .

-------------
triniforever

Posted By: 97sunflower
Date Posted: January 23, 2014 at 8:26 PM

I'll be using an evo-all for a bypass and it will handle acc,ign,start. The only thing is when trying to program remotes you have to cycle the key which is an input to the autostart. Not sure if it just needs an ign input or needs ign and acc input.

Posted By: triniforever
Date Posted: January 23, 2014 at 10:17 PM

I believe you only need ignition for programming the remotes

-------------
triniforever

Print Page | Close Window