viper 5704v, 508d module
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=135908
Printed Date: May 15, 2025 at 2:50 PM
Topic: viper 5704v, 508d module
Posted By: ckhaustralia
Subject: viper 5704v, 508d module
Date Posted: January 23, 2014 at 9:30 PM
Can anyone give me ideas on installing the 508D Module, The viper manual says it cant be plugged into either of the 2 existing sensor port due to Current limitations, if they are referring to current as in power, could I not still use that port but run the positive and neg from the module to a different source. Failing that can anyone give me ideas as to how to wire it up as a zone and what wires to use please
Thanks in advance...
Replies:
Posted By: ckhaustralia
Date Posted: January 23, 2014 at 9:34 PM
Ok have cut the black and red wires going to the 508D, black to earth, red to a positive, both sensors appear to be working how ever, if I try setting off the shock sensor it will show up as proximity sensor on fob screen, if I swap the plugs in the ports on the brain around and set off the proximity sensor it displays on the fob shock sensor, is there any way to made the brain of the system know what is plugged into what?
|