python alarm/remote starter no horn honk

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=135976
Printed Date: May 15, 2025 at 8:30 AM

Topic: python alarm/remote starter no horn honk

Posted By: godd dan it
Subject: python alarm/remote starter no horn honk
Date Posted: February 02, 2014 at 9:12 AM

I just installed a Python alarm/remote starter. I hooked up the horn wire and I verified that it is the correct wire. I cant figure out how to get the horn to honk when you press lock/unlock buttons. Do I have to go into the features and change a setting? Right now the horn honk feature is set to full alarm. The horn does go off when the alarm is activated.

Thanks for the help.

-------------

Replies:

Posted By: triniforever
Date Posted: February 02, 2014 at 9:28 AM

You have to go into the programming menu and change the horn honk to 20ms or 30ms to activate the horn on lock and unlock !

-------------
triniforever

Posted By: godd dan it
Date Posted: February 02, 2014 at 10:08 AM

I knew it was something pretty easy, but couldnt exactly remember. Thanks!

-------------

Print Page | Close Window