’13 honda accord python dball2
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=135977
Printed Date: May 05, 2024 at 7:18 PM
Topic: ’13 honda accord python dball2
Posted By: godd dan it
Subject: ’13 honda accord python dball2
Date Posted: February 02, 2014 at 10:20 AM
I installed a Python alarm/remote starter with the Dball2 in a 2013 Honda Accord. I used D2D for the install and it also required a valet key to be used . I have one issue. I cant unlock the car when it is in remote start mode. I have to put the key in the door cylinder to unlock it. Any ideas what I can do?
Thanks.
-------------
Replies:
Posted By: godd dan it
Date Posted: February 02, 2014 at 10:25 AM
Also, one more question. The Xpresskit install sheet said to hook up the rearm wire to the parking lights if the car has automatic headlights. What exactly is the rearm wire on the Python alarm/remote starter?
-------------
Posted By: triniforever
Date Posted: February 02, 2014 at 11:00 AM
Where did u get the unlock wire in the car or did you wire the unlock wire to the DBALL?if so try hardwiring the unlock wire to the car and it should work ,the rearm wire on the Python should be a GREEN / WHITE wire on one of the harness cuz you didn't give a model number I can't say which harness !
-------------
triniforever
Posted By: godd dan it
Date Posted: February 02, 2014 at 2:38 PM
I cant remember the model number of the Python unit off hand, but I did hook up the GREEN / WHITE wire, so I did get it right then.
I have the door lock wires working through the Dball. I will try hardwiring them. I think that will solve the problem like you said. Thanks.
-------------
|