Print Page | Close Window

avital 4103l door locks starting

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=135980
Printed Date: May 16, 2025 at 5:13 AM


Topic: avital 4103l door locks starting

Posted By: ggora
Subject: avital 4103l door locks starting
Date Posted: February 02, 2014 at 6:33 PM

Hello,

I just installed an Avital 4103L remote start/entry in my 01 RAM. Everything works fine, locks, remote start etc.

Question I have is should the doors auto lock when remote starting if they are unlocked?



Replies:

Posted By: chev104275
Date Posted: February 03, 2014 at 4:24 PM
Use the negative start wire (small purple wire in the 4 pin harness ) through a diode to prevent feedback. Band faces the remote start.

-------------
If i Can't Install it    I Don't need it   Joe



Posted By: blanx218
Date Posted: February 04, 2014 at 3:24 PM
No. The 4103 doesn't have that feature. It remains in the lock or unlock state you left it in. Unless u use the (-) starter output to lock the doors like chev104275 said



Posted By: ggora
Date Posted: February 04, 2014 at 3:32 PM
So negative start wire through diode back to lock wire correct?


Thanks for your help



Posted By: blanx218
Date Posted: February 04, 2014 at 3:35 PM
Correct. Stripe on the diode towards the remote start.



Posted By: ggora
Date Posted: February 04, 2014 at 3:41 PM
Awesome. Thanks again everyone.


Print Page | Close Window